Assembly 24: (continued) | Updated October 16, 2007 | ||
|
|
|
|
Asm– | Part |
|
|
Index | Number | Units | Description |
41J8869 | 1 | 2nd detector mounting bracket | |
41D9783 | 1 | Exit sensor mounting bracket | |
41J9849 | 1 | Exit sensor detector (for standard lane with 19 inch belt) | |
41J8342 | 1 | Exit sensor detector (for wide lane with 25 inch belt) | |
41J9849 | 1 | Detector, flat pack sensor assembly, replaces 40M9508, (Flat pack sensor | |
|
|
| assemblies for the emitter and detector should be replaced as a set. Order |
|
|
| 41J9845 emitter.) |
28R3197 | 1 | Guide, tracking, motor end (order with 28R3194). Adhesive plastic sticker. Reduces | |
|
|
| friction between belt and metal sides. |
– | 41J7676 |
| M6 x 19 Black screw for security shield (not shown) |
41J7678 | 2 | Security shield | |
41J9544 | 1 | Capacitor box, 230V | |
41J9546 | 1 | Capacitor box, 115V | |
– | 40M9423 | 1 | Capacitor box cable (provides power to the conveyor motors) (not shown) |
41D9785 | 1 | Curtain support, RH (for standard lane with 19 inch belt) | |
41D9786 | 1 | Curtain support, RH (for wide lane with 25 inch belt) | |
41D9803 | 1 | Curtain support, LH (for standard lane with 19 inch belt) | |
41D9804 | 1 | Curtain support, LH (for wide lane with 25 inch belt) | |
41D9784 | 1 | Cap, tower (one on each side) | |
44M2189 | 1 | Curtain detector/emitter sensor assembly (matched set) (located in the curtain | |
|
|
| tower) |
41D9787 | 1 | Tower, rear curtain support (for standard lane with 19 inch belt) | |
41D9788 | 1 | Tower, rear curtain support (for wide lane with 25 inch belt) | |
44M2232 | 1 | Curtain guard, customer side (for wide lane with 25 inch belt) | |
– | 41J8414 | 4 | Cable, curtain sensor fanout dongle (not shown) |
– | 41J8336 | 1 | Wire cord clips (bag of 10) |
– | 42H1161 | 1 | Cable tie (not shown) |
– |
|
| NOTE: Hardware items such as screws, bolts, nuts, and washers removed during |
|
|
| the disassembly of parts should be retained for use during |
|
|
| parts. Screws, bolts, nuts, and washers can not be ordered separately, they are |
|
|
| available as part of a field kit. See Chapter 12, “Field Kits and Tools,” on page 101 |
|
|
| for a listing of screws, bolts, nuts, and washers contained in each field kit. |
– | 41E1748 | 4 | Transition plate extension cable |
– | 41E1749 | 2 | Sensor extension cable |
|
|
|
|
62Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3
