Step 4. Selecting an IDE connector
Newer computers typically have two IDE connectors. If your computer has
two IDE connectors, use the secondary IDE connector to connect the
CD-RW/DVD-ROM Combination Drive. Typicallythe secondary IDE connector
is adjacent to the primary IDE connector that connects to your hard disk drive.
The IDE connector you select and the cable position you select will determine
which configuration jumper setting you will use for the drive.
vIf you have two IDE connectors, connect the CD-RW/DVD-ROM
Combination Drive to the secondary IDE connector with the IDE cable that
comes with your drive. If the CD-RW/DVD-ROM Combination Drive is the
only device on the secondary IDE connector, you will use the master
configuration setting. If there is another device on the secondary connector
in addition to the CD-RW/DVD-ROM Combination Drive, you will use the
slave configuration setting.
vIf you must attach the CD-RW/DVD-ROM Combination Drive to the same
IDE connector as a faster device, such as a hard disk drive, use the slave
setting for the CD-RW/DVD-ROM Combination Drive and the master
setting for the faster device. In some instances, the hard disk drive might
require a master-with-slave-present setting when another device on the same
cable is configured as a slave. For further information on setting
configuration jumpers on other devices, refer to the documentation that
came with your computer or with the device in question.
vSome non-IBM computers support the cable-select setting, where the
position of the device on the cable determines whether a device is master or
slave. See the documentation that comes with your computer to determine if
your system supports this setting.
Step 5. Mounting the drive in the bay
Attention: Be sure to use the mounting screws in the option package when
you are driving screws directly into the drive. Using screws that are too long
might damage the drive.
You can mount the CD-RW/DVD-ROMCombination Drive horizontally or
vertically in the computer. If you mount the drive vertically,you must secure
any discs that you place into the drive before the drive tray is closed, or the
CD-RW/DVD-ROM Combination Drive will not be able to read the disc
properly.
1. Slide the drive into the bay.Your computer might have specific required
procedures for installing storage devices. For more information on storage
devices, refer to the documentation that comes with your computer.
2. Align the drive-bay screw holes with the threaded holes in the drive
housing or mounting bracket.
1-6 IBM 32X/10X/40X/16X MAX CD-RW/DVD-ROM Combination Drive: User’s Guide