3.Take the cables out of a cable holder.

Note: If a Mini-PCI Card has been installed in your computer, and you remove the Card and do not install a new one, put the cables in the cable holder after disconnecting them from the Card.

4.Connect the cables to the new Mini-PCI Card.

Note: Plug the gray cable with the tab marked MAIN into jack J1, and the black cable with the tab marked AUX into jack J2.

About the IBM® High Rate Wireless LAN Mini-PCI Adapter 1-5

Page 11
Image 11
IBM 22P7713 manual About the IBM High Rate Wireless LAN Mini-PCI Adapter