Installing the device driver in Microsoft® Windows® 98, Windows Me, Windows 2000, or Windows XP
To install the device driver in Windows 98, Windows Millennium Edition (Me), Windows 2000 Professional, or Windows XP, do the following:
1.Start your operating system. If you are using Windows 2000 or Windows XP, log on with a user ID authorized as an administrator.
2.Click Start → Run.
3.Specify SETUP.EXE with a full path (C:\DRIVERS\WIN\WLLANINT\SETUP.EXE or C:\IBMTOOLS\DRIVERS\WLLANINT\SETUP.EXE).
4.Click OK.
5.Follow the instructions on the screen.
6.When asked whether you want to restart the system, click Yes.
Installing the device driver in Windows NT®
To install the device driver in Windows NT, do the following:
1.Start Windows NT. Log on with a user ID authorized as an administrator.
2.Click Start → Settings → Control Panel.
3.
4.If this is the first time the Network has been configured, the Network Configuration dialog box is displayed. Otherwise, go to step 20 on page
5.<First Network Configuration> Click the Yes button.
6.Select Wired to the Network.
7.Click the Next button.
8.Click the Select from list button.
9.Click the Have Disk button.
10.In the Insert Disk dialog box, type the path (C:\DRIVERS\WIN\WLLANINT or C:\IBMTOOLS\DRIVERS\WLLANINT) to the directory that contains the driver.
11.Click the OK button.
12.Select High Rate Wireless LAN Mini-PCI Adapter with Modem II.
13.Click the OK button.
14.Click the Next button.
15.Follow the instructions on the screen.
16.Follow the prompts for any Windows NT installation disks by typing the path to the directory that contains Windows NT files. (This is usually C:\i386, or, on the Windows NT
17.Follow the instructions on the screen.
18.When the installation is complete, click the Finish button.
