IBM 27L3405, 770X setup guide Electrical Safety Setting Your Computer

Electrical Safety	Setting	Up	Your Computer
DANGER	You are	now	ready to assemble and start your co

Electrical current from power, telephone, and

communication

cable

is

hazardous.

To

avoid

shock

hazard,

connect

and

disconnect

cables

as

shown

below

when

installing,

moving,

or

opening

the

covers

of the

product

or

attached

devices.

The

3-pin power cord

must

be

used

with

a

proper

outlet.

To Connect

Turn everything

Attach all cables

Attach the signal cables

OFF.

to devices.

to receptacles.

Attach the power cord to an outlet. Turn the device ON.

To Disconnect

Turn everything	First, remove	Remove signal cables	Remove all cables
OFF.	the power cord	from receptacles.	from devices.
	from the outlet.

1If you want to connect a printer to your co connector cover. Connect one end of the printer the parallel connector and the other end to y Then power on the printer.

2 Connect the	AC	Adapter to the	computer's	power
the rear	of	the computer) in	the order	shown
		1	3

Note: In the U.K., by law:

2

The telephone line cable must be connected after the power cord.

The	power cord must be disconnected after the telephone
line	cable.

2