SSA RAID Adapter Installation and User's Guide.
Chapter 2. Installing an SSA RAID Adapter
2.0Chapter 2. Installing an SSA RAID Adapter
To complete the installation, you must:
1.Install the adapter card
2.Connect the necessary SSA cables
3.Revise the system configuration information
4.Load an operating system, unless one is already loaded in the server
5.Load the device drivers and utility programs.
This chapter describes how to perform these tasks. How to configure disk arrays and attach them to your operating system is described in Chapter 3, "Configuring SSA Subsystems" in topic 3.0.
Subtopics
2.1Installing the Adapter Card
2.2Connecting the Disk Drives
2.3Configuring the Disk Drives
2.4Installing an Operating System
2.5Installing the Device Drivers and Utility Programs
2.6Selecting Your Boot Device
_ Copyright IBM Corp. 1996
2.0 - 1
