6.Check to see if there is a conflict between devices by doing the following:
a.In the System Properties window,
b.Click the Properties button.
c.Under Device Status, there is a statement indicating whether the
7.Click OK in the System Properties window.
8.Shut down and restart the computer.
If you are using Windows NT 4.0, follow these instructions:
1.Click Start --> Settings --> Control Panel.
2.
3.Click the Device tab.
4.Check to see that neither controller has conflicts by doing the following:
a.Click to select a controller.
b.Click Properties.
c.Click the Card Info tab; under the Device Status section, there is a statement indicating whether the controller is working properly.
d.Click OK to return to the SCSI Adapter window.
e.Click to select another controller.
f.Click the Card Infotab; under the Device Status section, check the statement to see whether the controller is working properly.
g.If you have more than two SCSI controllers, use the above steps to check the device status of the other controller(s).
h.If you discover a conflict and one or more of the controllers is not working, refer to ªAppendix C. Help and service informationº on page
If you are using Windows 2000, follow these steps:
1.Click Start
2.Click System.
3.Click Hardware tab.
4.Click the Device Managerbutton.
5.
Appendix B. Problem solving |