__ 1. Find the HSL cables and the SPCN cables in the information that is
shipped with your expansion unit. Youwill use three HSL cables and two
SPCN cables to perform this procedure.
__ 2. Attach a label to each end of the cables. Label each of the cables as follows:
__ a. Label the two ends of the first cable 0.
__ b. Label one end of the second cable 0 and the other end 1. If you have
different length cables, this cable should be the shortest one.
__ c. Label the two ends of the third cable 1.
__ 3. Locate an available HSL connector on your system unit.
Figure12. HSLConnections
Figure13. SPCNConnections
20 Setting up your 0578, 5074, 5078 or 5079 Expansion Unit V5R2