IBM 730, 710 manual Technical information, Specified operating environment, Physical specifications

For details on available services, contact your IBM representative or visit

http://www.ibm.com/services/

For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit

http://www.ibm.com/services/continuity

For details on education offerings related to specific products, visit

http://www.ibm.com/services/learning/index.html

Select your country, and then select the product as the category.

Technical information

Specified operating environment

Physical specifications

Rack-Mount:

Width: 440 mm (19.0 in)

Depth: 706 mm (27.8 in)

Height: 89 mm (3.5 in)

Weight (Maximum configuration): Power 710 -- 28.2 kg (62 lbs)

Power 730 -- 29.5 kg (65 lbs)

Operating environment

•Temperature: (nonoperating) 5° to 45°C (41° to 113°F); recommended temperature (operating) 18° to 27°C (64° to 80°F); allowable operating temperature 5° to 35°C (41° to 95°F)

•Relative humidity: Nonoperating 8% to 80%; recommended 5.5°C (42°F) dew point to 60% RH and 15°C (59°F) dew point

•Maximum dew point: 28°C (84°F)(operating)

•Operating voltage: 100 to 127 or 200 to 240 V ac (Power 710); 200 to 240 V ac (Power 730);

•Operating frequency: 47/63 Hz

•Maximum measured power consumption:

–Power 710 -- 650 watts (maximum)

–Power 730 -- 1100 watts (maximum)

•Power factor: 0.98

•Thermal output:

–Power 710 -- 2,218 Btu/hour (maximum)

–Power 730 -- 3,754 Btu/hour (maximum)

•Power-source loading

–Power 710 -- 0.663 kVa (maximum configuration)

–Power 730 -- 1.122 kVa (maximum configuration)

–Maximum altitude: 3,050 m (10,000 ft)

Note: The maximum measured value is the worst case power consumption expected from a fully populated server under an intensive workload. The maximum measured value also accounts for component tolerance and non-ideal operating conditions. Power consumption and heat load vary greatly by server configuration and utilization. The IBM Systems Energy Estimator should be used to obtain a heat output estimate based on a specific configuration

http://www-912.ibm.com/see/EnergyEstimator

IBM Europe, Middle East, and Africa Hardware	IBM is a registered trademark of International Business Machines Corporation 27
Announcement ZG10-0214