Manuals / IBM / Computer Equipment / Laptop Docking Station

IBM 92P1836 manual ThinkPad Dock top cover, Rear, view, continued

Models: 92P1836

1 16

Download 16 pages 50.82 Kb

Page 6

Image 6

1020 ThinkPad Dock top cover

Note

This section is only for the ThinkPad Dock (FRU no. 08N1546). The top cover and screw kit for ThinkPad Dock (FRU no. 12P4143) is not available for the ThinkPad Dock with extension plate (FRU no. 08N1537) .

(Rear	view)

Step		Screw (quantity)	Torque

		M2.5 × 4.8 mm (2)	0.392 Nm
			(4 kgfcm)

(continued)

Page 6

Image 6

IBM 92P1836 manual ThinkPad Dock top cover, Rear, view, continued

Contents

FRU replacement notices Screw noticesv Torque driver v Plastic to plasticv Logic card to plastic 90 degrees more Cross-sectionRemoving and replacing a FRU DANGERThere are two types of ThinkPad Dock, as follows 1010 ThinkPad Dock PCI coverBefore replacing the PCI cover v ThinkPad Dock FRU no. 08N1546 PCI cover FRU no. 05K6246Bottom view view 1020 ThinkPad Dock top coverRear continuedBottom viewcontinued position. Release the front latches in step When replacing the top cover, do the followingMake sure that the system lock key A is set to the Unlock and thenv Make sure that the device release lever is seated correctly v Make sure that the release button works correctly2010 ThinkPad Dock II PCI cover Bottom viewview 2020 ThinkPad Dock II top coverRear continuedBottom viewcontinued is set to the Then detach the connectorMake sure that the system lock key Unlock position. Release the front latches in stepParts list Optional FRUsPower cords ThinkPad Dock and ThinkPad Dock For 3-pin power cordsPower cords ThinkPad Mini Dock For 2-pin power cordsFor 3-pin power cords

1020 ThinkPad Dock top cover

(Rear

view)

(continued)