IBM 92P1836 manual Make sure that the system lock key A is set to the Unlock, and then, For step

Models: 92P1836

1 16

Page 8

position. Release the front latches in step			, and then
remove the top cover	. For step	, see the inside
view, shown in the circle.

(continued)

Image 8

Contents

FRU replacement notices Screw noticesv Plastic to plastic v Logic card to plasticv Torque driver 90 degrees more Cross-sectionRemoving and replacing a FRU DANGER1010 ThinkPad Dock PCI cover Before replacing the PCI coverThere are two types of ThinkPad Dock, as follows v ThinkPad Dock FRU no. 08N1546 PCI cover FRU no. 05K6246Bottom view 1020 ThinkPad Dock top cover Rearview continuedcontinued Bottomview When replacing the top cover, do the following Make sure that the system lock key A is set to the Unlockposition. Release the front latches in step and thenv Make sure that the device release lever is seated correctly v Make sure that the release button works correctly2010 ThinkPad Dock II PCI cover Bottom view2020 ThinkPad Dock II top cover Rearview continuedcontinued Bottomview Then detach the connector Make sure that the system lock keyis set to the Unlock position. Release the front latches in stepParts list Optional FRUsPower cords ThinkPad Dock and ThinkPad Dock For 3-pin power cordsFor 3-pin power cords Power cords ThinkPad Mini DockFor 2-pin power cords