Chapter 1. IBM AS/400e 170 models 11
1.5 AS/400e Model 170 features
This section identifies the supported features for the AS/400e Model 170.
PCI cards are subject to plugging rules. See PCI Card Placement Rules for the IBM eServer
iSeries Server, REDP-3638 for details.
Power and packaging
#1402 Line cord 9-ft 120 volt
Feature #1402 specifies 9 ft (2.8 m), 15 Amp, and 120 volt (U.S. default). The #1402 specify feature provides up to two
line cords: one for the system and one for the expansion unit. One line cord is provided for the system unit.
#1403 Line cord 9-ft 240 volt
Feature #1402 specifies 9 ft (2.8 m), 15 Amp, and 240 volt. This specify provides up to two line cords: one for the system
and one for the expansion unit. One line cord is provided for the system unit.
#7101 #7101 System Expansion Unit
The #7101 System Expansion Unit allows the addition of up to nine Peripheral Component Interconnect (PCI) cards. It
includes a base controller (CCIN 2809) as standard and can have another added by installing a #2809. The #7101 can
also support one #2857 Integrated PC Server or one #2866 PCI Integrated Netfinity Server. The #7101 supports up to
six disks (driven by the same disk controller located in the system unit).
The #7101 is mutually exclusive with a #7102 System Expansion Unit.
Maximum: One per system; requires one #1402 or #1403 line cord
Not available on the #2289, #2407, #2408, or #2409 processors
#7102 #7102 System Expansion Unit
The #7102 System Expansion Unit allows the addition of up to nine PCI cards. It includes a base controller (CCIN 2824)
with 32 MB of memory as standard and can have another added by installing a #2824 PCI Feature Controller. The #7102
can also support one #2857 Integrated PC Server or one #2866 PCI Integrated Netfinity Server. The #7102 additionally
supports up to six disks (driven by the same disk controller located in the system unit).
The #7102 is mutually exclusive with a #7101 System Expansion Unit.
Maximum: One per system; requires one #1402 or #1403 line cord
Minimum operating system level: OS/400 V4R4
Not available on the #2289 processor
Main storage
Base There are no features to specify the base memory of 64 MB on the Model 170 #2159, #2160, #2289, #2290, and #2291
processors. There are also no features to specify for 256 MB on the Model 170 #2164, #2176, #2183, #2292, #2385,
#2386, and #2388 processors, for 256 MB on the #2407 Dedicated Domino Processor, or for 512 MB on the #2408 and
#2409 Dedicated Domino Processors.
#3001 32 MB Main Storage (DIMM)
The #3001 plugs directly into the CPU or memory riser card depending on the processor feature. Must be added in pairs.
Maximum: Six on all processors, except the #2385, #2386 and #2388 processors, which support a maximum of 12, and
#2408, #2409, which support a maximum of 12.
The #3001 is a Customer Install Feature (CIF) for an Miscellaneous Equipment Specification (MES) that only includes
CIF features.
#3002 128 MB Main Storage (DIMM)
The #3002 plugs directly into the CPU or memory riser card depending on the processor feature. Must be added in pairs.
Maximum: Six on all processors except the #2385, #2386, and #2388, which support a maximum of 14 and Dedicated
Domino processors #2408 and #2409, which support a maximum of 12.
The #3002 is a Customer Install Feature for an MES that only includes CIF features.
#3003 256 MB Main Storage (DIMM)
The #3003 plugs directly into the CPU or memory riser card depending on the processor feature. Must be added in pairs.
Mixing #3003 and #3004 within pairs (or quads on the #2385, #2386, and #2388 processors when more than eight
memory features are installed) is not allowed.
Maximum: 12.
Minimum operating system level: OS/400 V4R3
Supported on processors #2385, #2386, and #2388 only
The #3003 is a Customer Install Feature for an MES that only includes CIF features.