Chapter 2. IBM iSeries SB2 and SB3 models 49
#9771 #9771 Base PCI 2-line WAN with integrated modem
The #9771 is a 2-line WAN adapter. One port supports V.90 56K async data on PPP by way of an internal modem. The
second port supports multiple protocol communications (WAN).
Connection to the V.90 port uses a telephone cable. Connection to the WAN communication port is with one of the following
cables:
#0348 V.24/EIA232 20-ft (6 m) PCI cable
#0349 V.24/EIA232 50-ft (15 m) PCI cable
#0353 V.35 20-ft PCI cable
#0354 V.35 50-ft PCI cable
#0356 V.36 20-ft PCI cable
#0359 X.21 20-ft PCI cable
#0360 X.21 50-ft PCI cable
#0365 V.24/EIA232 80-ft PCI cable
#0367 Operations Console PCI Cable
The #9771 supports the #0367 Operations Console PCI Cable on the WAN (RVX) port to directly connect the Operations
Console for OS/400 V5R1 or later or with OS/400 V4R5 and PTF MF25397 (not in cumulative PTF). Direct connection of
the Operations Console is mutually exclusive with V.90 support of the dial-in Operations Console.
The #9771 supports the #5544 System Console on Operations Console on the V.90 port for dial-in Operations Console
with OS/400 V5R1. An additional #4745 is required on OS/400 V4R5 systems for dial-in Operations Console support.
The #9771 ships with a country- or region-specific telephone cable. No modem cable feature is required on the order.
ECS is supported over TCP/IP on the V.90 telephone cable port with OS/400 V5R1, or with OS/400 V4R5 and PTF
SF64124. Fax is supported on the V.90 port with OS/400 V5R1, or with OS/400 V4R5 and PTFs MF25290 and SF64604.
To support ECS on the WAN port of the #9771, specify one of the following cables:
#0348 V.24/EIA232 20-ft (6 m) PCI cable (default)
#0349 V.24/EIA232 50-ft (15 m) PCI cable
#0365 V.24/EIA232 80-ft PCI cable
ECS operates on the WAN port of the #9771 by changing the *RSRCNAME parameter of the QESLINE and QTILINE line
descriptions to that of the WAN port on the #9771 card.
Remote Power On is not supported. The #9771 does not support the remote ring indicate function.
For further configuration information, see:
http://www.iseries.ibm.com/tstudio/planning/esa/esa.htm
Minimum operating system level: OS/400 V4R5 with supporting PTFs
The #9771 was withdrawn from marketing on 01 October 2005.
Disk units
#08xx Load Source Specify
Starting with the OS/400 V5R1 announcement, one of the following specify codes is required on all initial orders of a Model
SB2 or SB3:
#0826 - #4314 Load Source specify
#0827 - #4324 Load Source specify
#0828 - #4317 Load Source specify
#0829 - #4318 Load Source specify
Manufacturing uses this specify to place a corresponding disk unit feature in the load source position.
The #0826, #0827, #0828, and #0829 were withdrawn from marketing on 01 June 2006.
#4314 #4314 8.58 GB Disk Unit (Ultra SCSI)
The #4314 provides an additional 3 ½-inch two-byte single disk unit with 8.58 GB capacity (7200 RPM).
Maximum: Four on SB2. Six on SB3 #2316. Eight on SB3 #2618.
Minimum operating system level: OS/400 V4R4
The #4314 is a Customer Install Feature.
The #4314 was withdrawn from marketing on 31 January 2001.