50 iSeries and AS/400e System Builder
#4317 #4317 8.58 GB 10k RPM Disk Unit (Ultra2 SCSI)
The #4317 provides an additional 3 ½-inch single disk unit with 8.58 GB capacity.
Maximum: Four on SB2; six on SB3 #2316; eight on SB3 #2618
Minimum operating system level: OS/400 V4R4
The #4317 is a Customer Install Feature.
The #4317 was withdrawn from marketing on 03 December 2002 for new orders. Feature conversions to #4317 remain
available.
#4318 #4318 17.54 GB 10k RPM Disk Unit (Ultra2 SCSI)
The #4318 provides an additional 3 ½-inch single disk unit with 17.54 GB capacity.
Maximum: Four on SB2; six on SB3 #2316; eight on SB3 #2618
Minimum operating system level: OS/400 V4R4
The #4318 is a Customer Install Feature.
The #4318 was withdrawn from marketing on 01 June 2004 for new orders. Conversions to feature #4318 remain available.
#4324 #4324 17.54 GB Disk Unit (Ultra SCSI)
The #4324 provides a 3 ½-inch single disk unit with 17.54 GB capacity for additional disk storage.
Maximum: Four on SB2; six on SB3 #2316; eight on SB3 #2618
Minimum operating system level: OS/400 V4R4
The #4324 is a Customer Install Feature.
#4331 #4331 1.6 GB Read Cache Device
The #4331 provides 1.6 GB of capacity for large read cache function. It is mutually exclusive with DASD compression.
The system arrives in performance mode with compression function turned off on the #4748/#4778 PCI RAID Disk Unit
Controller.
For placement rules, see “#4331” on page277.
Maximum: One per #4748/#4778 PCI RAID Disk Unit Controller
Supported in Model SB2 and SB3, and in the #5065, and #5066
Requires the #2748 when the #4331 is installed in a #5065/#5066
Minimum operating system level: OS/400 V4R4
The #4331 is a Customer Install Feature.
The #4331 was withdrawn from marketing on 01 March 2002.
Internal tape units and CD-ROM
Supported
media
See 9.8, “QIC and VXA-2 tape specifications and compatibility for iSeries and AS/400e systems” on page378, for the
supported media for each tape device.
#4425 #4425 CD-ROM
The #4425 CD-ROMis can be mounted in the system unit. The #4425 can be used for alternate IPL (IBM distributed
CD-ROM media only) and program distribution. A minimum of one CD-ROM or DVD-RAM is required per iSeries server.
Minimum operating system level: OS/400 V4R4
The #4425 is a Customer Install Feature.
The #4425 was withdrawn from marketing on 21 November 2003 for new orders. Conversion to feature #4425 remains
available. The #4625 CD-ROM is the recommended replacement.
#4430 #4430 DVD-RAM
The #4430 is a feature DVD-RAM device that can be mounted in the system unit of Model SB2 or SB3. It is a 5.25-inch
half-high device which installs in a removable media slot. The #4430 is capable of writing and reading 4.7 GB on a single
disk (single side). For double sided media, the media must be flipped manually. It is also capable of reading 650 MB
CD-ROM disks. The #4430 can be used for alternate IPL, program distribution, and data interchange. It cannot be used
as an Alternate Load Device with OS/ 400 V5R1.
Prerequisites: Disk unit controller in system unit or tower where the device is mounted.
A minimum of one DVD-RAM or CD-ROM is required per iSeries server.
Minimum operating system level: OS/400 V4R5 with PTFs or OS/400 V5R1
The #4430 is a Customer Install Feature.
The #4430 was withdrawn from marketing on 01 January 2004.