HTEB1
User manual
Issue 0.2 Page 7 07/2002
1.5 Jumpers and switches
JP1 is used for switching the serial interface from 1:1
to crossed connection. If you connect a 1:1 cable (like
the cable that comes with the kit) use the default
setting. If you connect a crossed cable set the jumper
to alternate setting.
JP3 is used for the LCD-LED backlight. If the jumper is
closed (1-2) the backlight will be ON. Remove the
jumper (=open) if backlight operation is not
necessary.
JP2 is used for I2C interface
JP4 is used as an output for the DAC or for PWM
JP1 Operation
1-3, 2-4 1:1 operation
1-2, 3-4 Crossed connection
JP3 Operation
Closed LED backlight ON
Open LED backlight OFF
JP2, I2C-CON Operation
1+5V
2SDA
3SCL
4GND
JP4, D/A CON Operation
1 D/A Output (PWM)
2GND