IBM HS64, HOTR, HOTS manual Source code information, NOFCt, Header Files, Macros Description

Last Updated 6/5/2006

All

indicates to use all record ordinal numbers defined (i.e. 0x00-0x13). This parameter cannot be specified with the FILEADDR parameter.

FCt

specifies functional test mode.

NOFCt

specifies system test mode.

Help

displays the correct syntax of the command.

Examples

The following example will set the flag to run the snippets with ordinal 0 on I-stream two:

ZTEST 2 HOTS SET SNIPPETS

The following example will set the flags for not running the snippets with all ordinals on I-stream three:

ZTEST 3 HOTS SET NORMAL ALL

The following example will set the flag for running one snippet with ordinal 0 on I-stream four:

ZTEST 4 HOTS SET NOSNIPPETS

The following example will set state 2 for ordinal 2 on I-stream one using 64 bit HOTS driver:

ZTEST HS64 SET STATE-2 O-2

The following example will set Service 8 running the Functional Test mode:

ZTEST HOTS SET SERVICE-8 FCT

Source code information

The HOTX driver suite consists of the following program segments:

Header Files

None.

Macros

Macro	Description
hotreq.mac	This macro will be invoked at the start of both segments QHT0 and
	QHT1, and will then set up all the equates and constants that these
	segments will use.

6 HOTX Driver User's Guide © Copyright IBM Corp. 2006