Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptoms | Causes | Remedies |
• The iPod is not turned on. | Connections are incorrect. | Check the connecting cable and |
|
| its connection. |
• Buttons do not work as | The functions of the buttons | Press MODE (or OK) before |
intended. | have been changed. | performing the operation. |
• The sound is distorted. | The equalizer is activated on | Deactivate the equalizer either |
| both the receiver and the iPod. | on the receiver or the iPod. |
• Playback stops. | The headphones are | Restart the playback operation |
| disconnected during playback. | using control panel. |
• No sound is played when | The headphones are connected | Disconnect the headphones |
connecting the iPod nano. | to the iPod nano. | from the iPod nano. |
• “NO MAG (Magazine),” | Connections are incorrect. | Check the connecting cable and |
“NO IPOD,” or “Disconnect” |
| its connection. |
appears on the display of the |
|
|
receiver. |
|
|
• “NO FILES” appears on the | No tracks are stored in the | Import tracks to the iPod. |
display of the receiver. | iPod. |
|
• “RESET 1 (R1)” – “RESET 7 | Communication failure occurs | Disconnect the adapter from |
(R7)” appears on the display | between this adapter and the | both the receiver and the iPod. |
of the receiver. | iPod/the receiver. | Then, connect it again. |
• “RESET 8 (R8)” appears on | Communication failure occurs | Check the connection between |
the display of the receiver. | between this adapter and the | this adapter and the receiver. |
| receiver. |
|
•The iPod’s controls do not work after disconnecting from this adapter.
Communication failure occurs Reset the iPod. between this adapter and the
iPod.
13
