Elkay EDFPVR217RC Trouble Shooting & Maintenance, Operation Of Quick Connect Fittings, Parts List

EDFPVR217RC

PARTS LIST

ITEM NO.	PARTNO.	DESCRIPTION
1	LK464	Drain
2	112627543890	Screw #10-24 x 1/2 PH TR HD-Z
3	15005C	Nut - Reg. Retain 1-1/8 - 24
4	27658C	Bottom - Plate (HRFG-E)
	27201C	Bottom - Plate (HRFG-S)
5	40038C	Strainer-Beehive
6	40045C	Hex - Nut
7	40619C	Ferrule-Tailpipe
8	45662C	Push Button
9	45738C	Push Button Sleeve
10	50986C	Regulator Holder
11	98118C	Bubbler Assy VR
12	56087C	Push Button - Extension
13	56053C	Fountain - Galaxy Gray (HRFG-E)
	55969C	Fountain - Galaxy Gray (HRFG-S)
14	61313C	Regulator
15	75672C	Screw Cap
16	55996C	Strainer
17	56114C	Panel - Dbl Back Galaxy Gray
18	70012C	Bubbler Locknut
19	75575C	Ball Anti-Rotation
20	75554C	Insert - Threaded
21	15029C	Nipple Assembly
22	45736C	Nut - Regulator Mounting
23	56092C	Poly Tubing (Cut To Length)
NS	75674C	Wrench -Allen 7/64

11

19BASIN

2118

FIG. 7

1/4" O.D. TUBE	3/8" O.D. UNPLATED
	COPPER TUBE CONNECT
WATER INLET
	COLD WATER SUPPLY
TO COOLER
	BUILDING WATER INLET

NOTE: WATER FLOW

DIRECTIONSERVICE STOP (NOT FURNISHED)

FIG. 5

OPERATION OF QUICK CONNECT FITTINGS

SIMPLY PUSH IN	TUBE IS	PUSH IN COLLET
TUBE TO ATTACH	SECURED	TO RELEASE TUBE
	IN POSITION

PUSHING TUBE IN BEFORE

PULLING IT OUT HELPS TO

RELEASE TUBE

FIG. 6

TROUBLE SHOOTING & MAINTENANCE

Orifice Assy: Mineral deposits on orifice can cause water flow to spurt or not regulate. Mineral deposits may be removed from the

orifice with a small round file not over 1/8" diameter or small diameter wire. CAUTION: DO NOT file or cut orifice material.

Stream Regulator: If orifice is free of material deposits, regulate flow as in instructions on page 3(Step 9) or page 5(Step 7). If replacement is necessary, see parts list for correct regulator part number.

Actuation of Quick Connect Water Fittings: Cooler is provided with lead-free connectors which utilize an o-ring water seal. To remove tubing from the fitting, relieve water pressure, push in on the gray collar while pulling on the tubing.(See Figure 6, Page 7). To insert tubing, push tube straight into fitting until it reaches a positive stop, approximately 3/4".

PRINTED IN U.S.A.

FOR PARTS CONTACT YOUR LOCAL DISTRIBUTOR OR CALL 1.800.323.0620

ELKAY MANUFACTURING COMPANY • 2222 • CAMDEN COURT • OAK BROOK, IL 60523 • 630.574.8484

PAGE 5 98409C (Rev. B - 9/08)