Checking the type of your receiver
Operating procedures on the control panel and from the remote controller are different according to the type of the receiver.
Check the type of your receiver by referring to the chart below.
•If you are not sure about the type of your receiver, see the JVC web site
Click the corresponding link (“From the control panel,” “From the touch panel” or “From the remote controller”), so you can jump to the pages of operating procedures for your receiver.
•If your answer is “yes,” follow 
.
•If your answer is “no,” follow 
.
Is your receiver equipped with a touch panel?
Is your receiver equipped with a navigation system?
Does your receiver have 5 (up) and
∞(down) buttons?
Does your receiver have number (1 - 6) buttons?
It is recommended to use the remote controller for operating receivers whose control type is A, D, or E.
Type A
•From the control panel
•From the remote controller
Type B
•From the control panel
•From the remote controller
Type C
•From the control panel
•From the remote controller
Type D
•From the control panel
•From the remote controller
Type E
•From the touch panel
•From the remote controller
5
