4.Connect the audio cable to the audio port on the back of your computer. This port might be directly attached to your computer (figure C), or it might be part of a sound card (figure D). The audio port on your computer or sound card might be green to match the green connector on your monitor's audio cable.
C | D |
DEUTSCH FRANÇAIS ENGLISH
Identifying controls and connectors on the speaker bezel
1 |
|
2 | 4 |
| |
3 |
|
4 |
|
1.Volume Control: Setting the Volume for playback with the integrated speakers.
2.Power light.
3.Power button: (for speaker only) switching the loud speaker OFF or ON.
4.Headphone connector.
Switching on your Monitor
1.Switch on the power source and your computer.
2.Switch on your monitor by pushing and releasing the power switch marked 
.
(To switch off your monitor, push and release the power switch again.)
3.To update or install device drivers, follow the instructions in the Device Driver Installation section on page 8.
4.To optimise the displayed image, run Auto Setup by following the instructions in the Auto Setup section on page 11.
COMPL & WARR JAPANESE ITALIANO ESPAÑOL
7
