IBM L170m Power Management, Product Disposal, State, Indicator, Restoring Compliance Operation

Power Management

If your computer has previously been used with a CRT monitor and is

currently configured to a display mode outside the range that the Flat Panel monitor can display, you may need to re-attach the CRT monitor temporarily until you have re-configured the computer, preferably to 1280 x 1024 at 60Hz.

To benefit from power management, the monitor must be used in conjunction with a computer that implements the Video Electronics Standards Association (VESA) Display Power Management Signalling (DPMS) Standard.

The power management feature is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below.

As an ENERGY STAR® Partner, IBM has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.

State	Power	Screen
	Indicator
On	Steady green	Normal
DPMS	Amber	Blank
Standby
DPMS	Amber	Blank
Suspend
DPMS Off	Amber	Blank

Restoring	Compliance
Operation
Press a key or	ENERGY STAR®
move the mouse.
Press a key or	ENERGY STAR®
move the mouse. *
Press a key or	ENERGY STAR®
move the mouse. *

* There may be a slight delay before the picture reappears.

Product Disposal

The fluorescent lamp in the liquid crystal display contains a small amount of mercury. Dispose of it as required by local ordinances and regulations.

22