ASSEMBLY

SQUARING THE BLADE TO THE MITER TABLE

See Figures 28 - 31.

Unplug the saw.

Pull the saw arm all the way down and lock in transport

position.

Lift the miter lock lever.

Rotate the miter table until the pointer on the miter scale

is positioned at 0°.

Lock the miter lock lever by pushing it down.

Lift the bevel lock lever to loosen and set the saw at 0°

bevel (blade set 90° to miter table). Retighten the bevel

lock lever by pushing it down.

Place a combination square against the miter table and

the flat part of saw blade.

NOTE: Make sure that the square contacts the flat part

of the saw blade, not the blade teeth.

Rotate the blade by hand and check the blade-to-table

alignment at several points.

The edge of the square and the saw blade should be

parallel as shown in figure 29.

If the top or bottom of the saw blade angles away from

the square as shown in figures 30 and 31, adjustments

are needed.

Lift the bevel lock lever.

Using the blade wrench, loosen the two socket head

screws securing the bevel scale and slide the pivot

assembly left or right as needed to bring the saw blade

into alignment with the square. Retighten the socket head

screws.

Retighten the bevel lock lever by pushing it down.

Recheck blade-to-table alignment.

NOTE: The above procedure can be used to check blade

 

®

BEVEL

 

LOCK

 

LEVER

BLADE

 

SLIDING

MITER

FENCE

COMBINATION

MITER

SQUARE

MITER

LOCK

 

TABLE

 

LEVER

 

 

 

CORRECT VIEW OF BLADE

 

SQUARE WITH MITER TABLE

 

 

 

Fig. 29

 

®

 

COMBINATION

SQUARE

VIEW OF BLADE NOT SQUARE WITH MITER TABLE,

squareness of the saw blade to the miter table at both 0°

and 45° angles.

Your saw has several scale indicators. After squaring adjust- ments have been made, it may be necessary to loosen the indicator screws and reset them to zero. See Figure 28.

BEVEL

SCALE

SCALE

INDICATOR

BEVEL

SCALE

ADJUSTMENTS ARE REQUIRED

®

COMBINATION

SQUARE

Fig. 30

SOCKET HEAD

INDICATOR

VIEW OF BLADE NOT SQUARE WITH MITER TABLE,

SCREW

SCREW

Fig. 28

 

 

ADJUSTMENTS ARE REQUIRED

Fig. 31

24

Page 24
Image 24
RIDGID MS1290LZ1 manual Squaring the Blade to the Miter Table, See Figures 28, Sliding Miter Fence, Bevel Scale, Indicator

MS1290LZ1 specifications

The RIDGID MS1290LZ1 is a powerful miter saw designed for both professional tradespeople and avid DIYers, providing exceptional versatility, precision, and ease of use. With its robust features and innovative technologies, this miter saw stands out in the crowded market of power tools.

One of the standout features of the MS1290LZ1 is its powerful 15-amp motor, which generates an impressive 4,000 RPM. This high-speed operation allows for quick and clean cuts through various materials, including hardwood, softwood, and composites. Capable of making both bevel and miter cuts, the saw offers a cutting capacity of up to 12 inches, making it suitable for a range of applications, from framing to crown molding.

The MS1290LZ1 is equipped with a dual bevel system, allowing users to make beveled cuts to the left and right with ease. This means that operators can achieve precise angles without the need to flip or reposition their workpieces, significantly enhancing efficiency. The saw features a generous cutting capacity of 0 to 50 degrees for miter cuts on both sides, enabling a wide variety of projects with intricate angles.

Another notable characteristic of this miter saw is its advanced laser guide system. This technology projects an accurate line of cut directly onto the material, ensuring maximum precision. The adjustable laser can be aligned with the blade for improved accuracy, reducing the likelihood of errors. Additionally, the MS1290LZ1 includes a built-in work light that illuminates the cutting area, providing visibility in low-light environments.

The saw's ergonomic design enhances user comfort during operation. Equipped with a sturdy and lightweight chassis, the MS1290LZ1 is easy to transport, making it an excellent choice for on-site jobs. The handle features a comfortable grip, allowing for extended use without causing fatigue. Moreover, the saw includes a dust collection port that helps maintain a clean workspace by minimizing sawdust and debris.

In conclusion, the RIDGID MS1290LZ1 miter saw combines power, precision, and user-friendly features, making it an ideal tool for both novice and experienced users. With its powerful motor, dual bevel capabilities, advanced laser guide, and ergonomic design, this miter saw offers the versatility and performance needed to tackle any cutting task with confidence. Whether you're framing a house, crafting custom furniture, or working on detailed trim, the MS1290LZ1 is equipped to handle the job efficiently and accurately.