IBM L200p manual Input Signal

ENGLISH

	OSD Icon		Description	Sub-menu(s)		Control and adjustments
						Analog	Digital
			Use this button to make the analog or		Analog
			digital connector active. This feature
			is used when two computers are
Image		Input Signal	connected to the monitor. The default		Analog
			setting is analog.
Properties
					Digital
			Displays the detailed information of
		Information	mode, model name and microcode.
Options
			The language chosen affects only the	• English
			language of the OSD.	• Français
			Select one of the six languages to use	• Italiano
		Menu Language	for the OSD.	• Deutsch
			It has no effect on any software	• Español
				•
			running on the computer.
			Changes the position of the OSD on	• Default		Moves the OSD to the center
			the screen.			of the screen.
		Menu Position		Custom
				• Horizontal
				• Vertical
				• Save
			Reset should return all available	• Cancel
			functions (apart from language which	• Reset
		Factory Default	should not change unless adjusted
			via the Language menu) to their
			factory presets.
			Change button repeat rate and menu	Button		Adjusts respondence speed
			time-out setting.	repeat rate		of button.
				• Off
		Accessibility		• Default
				• Slow
				Menu time out		Adjusts the length of time for
						which the menu will stay on
						the screen before it
						disappears.
			Exits from current OSD menu.
Exit

21