RFXALET and RFXLOGS correspond to new fields in the RACROUTE
REQUEST=FASTAUTH parameter list. These fields only exist in parameter lists
created with RELEASE=2.4 or higher. Therefore, these fields must only be
accessed when the RFXPVERS indicates Release 2.4 or higher.
Macros
Figure 6 lists changes to executable macros for OS/390 Release 4. These are for
your information; there is no reason to modify any existing programs to specify the
new release level. These changes are general-use programming interfaces (GUPI).
Figure 6. Changed Executable Macros
Macro Description Support
ICHEACTN
ICHEINTY
ICHETEST
These macros accept the new RELEASE=2.4
keyword. New FMID
RACROUTE REQUEST=FASTAUTH allows the following to be
specified:
LOGSTR=
parameter
Message suppression (MSGSUPP=YES)
ACEEALET=
alet_addr parameter
Authorization
support for
DB2
Messages
The messages that have been added or changed in RACF for OS/390 Release 4
are listed below. Compare the message identifiers and the corresponding message
text with any automated operations procedures your installation uses to determine
whether updates are required.
New Messages The following messages are added:
PERMIT Command Messages ICH06021I
RACF/DB2 External Security Module Messages: IRR900A, IRR901A, IRR902A,
IRR903A, IRR904I, IRR905I, IRR906I, IRR907I, IRR908I, IRR909I, IRR910I,
IRR911I
TARGET Command Messages: IRRM055I, IRRM056I
Changed Messages
The following messages are changed:
RACF Initialization Messages: ICH502I, ICH506I, ICH518I, ICH556I
PERMIT Command Messages: ICH06018I
RDEFINE Command Messages: ICH10302I
Chapter 3. Summary of Changes to RACF Components for OS/390 Release 4 17