Specifications, Standard SBC Functions | IBM PCM-5896 instruction

Specifications

•CPU: Intel Pentium MMX 166~233MHz, AMD K6-2 266~400MHz, Cyrix M II 233~300 MHz (With system bus frequencies up to 100MHz)

•CPU socket: Intel Socket 7

•BIOS: Award 256KB Flash BIOS

•Chipset: ALi 1541/1543

•I/O Chipset: ALi 1543/ITE IT8661F. Full 16-bit I/O decoded

•Memory: Onboard one 168-pin DIMM socket supports up to 128Mbytes SDRAM

•Enhanced IDE: Support up to two IDE devices. Supports Ultra DMA/ 33 mode with data transfer rate up to 33MB/sec.

•FDD interface: Supports up to two floppy disk drives, 5.25" (360KB and 1.2MB) and /or 3.5" (720KB, 1.44MB, and 2.88MB)

•Parallel port: One bi-directional parallel port. Supports SPP, ECP, and EPP modes

•Serial ports: Three RS-232 and one RS-232/422/485 serial ports.

Ports can be configured as COM1, COM2, COM3, COM4, or disabled individually. (16C550 equivalent)

•IR interface: Supports one IrDA Tx/Rx header

• Keyboard/mouse connector: 8 pin connector supports PC/AT keyboard and PS/2 mouse

•USB connectors: 4 x 2 header onboard supports dual USB ports

•Battery: Lithium battery for data retention of up to 10 years (under normal condition)

•Watchdog Timer: Can generate a system reset, IRQ15, or NMI. Support software selectable timeout interval. (2 sec. ~ 255 sec., 1 sec./ step)

•DMA: 7 DMA channels (8237 equivalent)

4PCM-5896 User Manual