23
DEUTSCH ENGLISHFRANÇAISESPAÑOLITALIANOJAPANESECOMPL & WARR
Screen is blank
and power
indicator is off
No power to
monitor
w Ensure that the
electrical outlet and the
monitor are both switched
on.
w Check that the power
cord is firmly plugged into
the electrical outlet and the
power supply unit.
w If the power cord plug
has a removable fuse,
replace it.
w Try another power
cord.
w Try another electrical
outlet.
Connecting
your Monitor
for Analog
section on
page 5
Screen is blank
and power
indicator is
steady green
Brightness
and Contrast
may be too
low
w Adjust brightness and
contrast.
User
controls
section on
page 15
Screen is blank
and power
indicator is
steady amber
The monitor is
in the Power
Management
Standby state
w Press any key on the
keyboard or move the
mouse to restore
operation.
w Check the Power
Management software on
your computer
Power
Management
section on
page 19
Screen is blank
and power
indicator is
Flashing green
every 0.5
second
The monitor is
not receiving
a video signal
w Check that the signal
cable is firmly connected to
the computer.
w Check that no pins are
bent in the signal cable
connector.
Connecting
your Monitor
for Analog
section on
page 5
Display mode
of the
computer is
outside the
range of the
monitor
w Reconfigure the
computer to use a
supported display mode.
Further
Information
section on
page 20
Problem Possible
Cause Suggested Action Reference
T84H_setup0926_final.fm Page 23 Thursday, October 5, 2000 8:45 AM