IBM Version 4 manual JOBD0100 Format

The information returned is the same information returned by the Displa Description (DSPJOBD) command.

Authorities and	Locks
	Job Description Object Authority		*USE
	Library	Authority	*USE
Required Parameter	Group
	Receiver	variable

OUTPUT; CHAR(*)

The variable that is to receive the information requested. You can size of this area to be smaller than the format requested if yo length of receiver variable parameter correctly. As a result, the A only the data that the area can hold.

Length	of	receiver variable
INPUT; BINARY(4)
The		length of the receiver variable. If this value is larger than
the		receiver variable, the result may not be predictable. The minim
8	bytes.

Format name

INPUT; CHAR(8)

The format of the job description information to be returned. You format:

JOBD0100			Basic job description information. For details, see “JOBD01
			Format.”
Qualified	job	description		name
INPUT; CHAR(20)
The		name	of	the	job	description	whose	contents	are	to	be retrieve
10 characters contain the name of the								job description, and the se
acters			contain the name of the library					where	the	job	description
can		use	these special values for				the	library	name:
*CURLIB			The	job's current library
*LIBL			The	library		list
Error	code
I/O; CHAR(*)
The		structure		in which to return error				information. For the format of
ture, see "Error					Code	Parameter"	in ChapterSystem API2		ofReferencethe.

JOBD0100 Format

		The	following		table	describes		the information that is returned in the
		able for the JOBD0100 format. For detailed descriptions of the fields
		Descriptions” on page 3-32.
		Offset
		Dec		Hex	Type		Field
		0		0	BINARY(4)		Bytes	returned
		4		4	BINARY(4)		Bytes	available
3-30
	System API Programming			V4R1