Enabled/Disabled: Click to enable or disable SNMP. By default is disabled.

System Name: Displays the name given to the WRT-410.

System Location: Displays the location of the WRT-410 (normally, the DNS name).

System Contact: Displays the contact information for the person responsible for the WRT-410.

Community: SNMP system name for exchanging SNMP community messages. The name can be used to limit SNMP messages passing through the network. The default name is “public”.

Trap Receiver: Type the name of the destination PC that will receive trap messages.

3.6.2 Remote Management

This screen enables you to set up remote management. Using remote management, the WRT-410 can be configured through the WAN via a Web browser. A user name and password are required to perform remote management.

HTTP: Enables you to set up HTTP access for remote management.

- 27 -