6.Enter the IP address, Port number, and Shared Secret Key used by the Secondary Radius Server.

7.Click “Apply”. The 802.1x settings will take effect right after WRT-410 reboots itself.

4.4 Wireless Client Setup

Windows XP is originally 802.1X support. As to other operating systems (windows 98SE, ME, 2000), an 802.1X client utility is needed. The following procedures show how to configure 802.1X Authentication with WL-3555 in Windows XP.

Please note that if you want to change the 802.1x authentication type of a wireless client, i.e. switch to EAP-TLS from EAP-MD5, you must remove the current existing wireless network from your preferred connection first, and add it in again.

4.4.1 EAP-MD5 Authentication

1.Go to Start > Control Panel, double-click on “Network Connections”.

2.Right-click on the Wireless Network Connection which using WL-3555.

3.Click “Properties” to open up the Properties setting window.

4.Click on the “Wireless Network” tab.

- 47 -