Multi–Platform Interface Feature Operation Guide 59
6400-LU1-SCS-Local SNA 3174 Control Unit
LU1-SCS mode is utilized when neither PSF
support nor IPDS is required to accomplish
the print function desired. An existing local
3174 SNA-connected control unit is
assumed. The steps required to install a
local LU1-SCS printer for host definitions
are as follows:
1. Define to VTAM by adding logmode
entry to VTAM Logmode Table
2. Define to JES2 (not required but
recommended. See details below)
3. Define to CICS or another Application
Program such as VPS or JES328X
products.
4. Select the options on the printer that
are appropriate for the environment.
Step 1 – VTAM Definition
The following should be added to the Local
Major Node VTAM definition. The printer will
be attached as an LU1-SCS capable printer.
LOC3174 VBUILD TYPE=LOCAL
LOCPU74 PU CUADDR=nnn...
LOC64XX LU LOCADDR=n,MODETAB=MYMODETB,DLOGMODE=64XXSCSL,
ISTATUS=ACTIVE
The following entry should be placed in the
VTAM MODE TABLE specified above or
another of your choice.
64XXSCSL MODEENT LOGMODE=64XXSCSL,
FMPROF=X'03',TSPROF=X'03',PRIPROT=X'B1'
SECPROT=X'90',COMPROT=X'3080',RUSIZES=X'8787',
PSERVIC=X'01000000E100000000000000',
PSNDPAC=X'02',SRCVPAC=X'02',SSNDPAC=X'00'