Ice-O-Matic EMF 450 Series manual Flake ICE Maker, Problem, Solution, Tight-FittingSpaces

EMF 450 Series

® Flake ICE Maker

✓Produces up to 552 lbs. (251 Kgs.)* of ICE per day

✓Constructed from sturdy, corrosion-resistant 300 series stainless steel

✓Only 16 inches wide

✓Available with an air-or water-cooled condenser

EMF 450 on a B55 Bin

ICE-O-Matic ® is the Best ICE Making Solution for: Hard Water, Food Safety and Tight Spaces

	Problem			Solution
Tight-Fitting Spaces		Maximum ICE
Kitchen space utilization		Maximum ICE production in a minimum amount of space:
		•	No additional side clearance required on a
			30 inch wide bin
		•	Maximum ICE production in a 16 inch wide cabinet
		•	Works on all industry dispensers and bins
Poor Ice Quality		Dependable ICE
Ice is too wet and soft		ICE-O-Matic Flake ICE Makers remove excess water by
		pushing the flaked ICE through an extrusion process.
		The result is high quality flaked ICE which is ideal for
		medical, supermaket or restaurant applications.
Operating Environments		ICE-O-Matic®Tough
Built to last?		Constructed with a brass evaporator and rugged stainless
		steel transport system enclosed in polyurethane insulation
Dirty Air Filter		Filter-Free Air
Forget to change the air filter?		No air filter to change

*Rated at 70 ° (21°) Air / 50° (10°) Water