Agilent Technologies N8201A manual Software Installation

User’s Guide

1

Software Installation

This installation process installs the required software and instrument drivers used by the N8201A performance downconverter:

“Verify the PC Meets Minimum Requirements" on page 6 “Step 1. Install Microsoft .NET Version 1.1" on page 7 “Step 2. Install the Agilent I/O Libraries" on page 8 “Step 3. Install the IVI Shared Components" on page 9

“Step 4. Install the Agilent Synthetic Instrument Finder" on page 11 “Step 5. Install the Agilent Synthetic Instrument GUI" on page 12 “Step 6. Install the IVI-COM Drivers" on page 13

“Step 7. Install the Agilent N8201A Performance Downconverter User Interface" on page 15

Install the following only if the N8201A performance downconverter has Option H02

“(Optional) Step 8. Install the Agilent N8201A Option H02 Spectrum Analyzer GUI" on page 17

Install the following only if the N8201A performance downconverter has Option H02

(Optional Steps 9, 10, and 11 are available to support legacy installations and are not required if the software from Step 8 is being used. This interface can be installed along with the Agilent N8201A Option H02 Spectrum Analyzer GUI, but only one interface can be used at any given time.)

“(Optional) Step 9. Install the Microsoft Virtual Machine (VM)" on page 19 “(Optional) Step 10. Install the Apache HTTP Server" on page 21 “(Optional) Step 11. Install the SA Remote Web Server" on page 24

Agilent Technologies 5