Agilent Technologies N8201A Magnetic Susceptibility, Ground the Instrument or System, Fields

Service, Support, and Safety Information 6

WA R N I N G	The mains wiring and connectors shall be compatible with the connector used in
	the premise electrical system. Failure to ensure adequate earth grounding by not
	using the correct components may cause product damage and serious injury.
Magnetic Susceptibility
	Degradation of some product specifications can occur in the presence of ambient
CAUTION
	power frequency magnetic fields of 30 A/m or greater. The product self-recovers
	and operates as specified when removed or shielded from the ambient magnetic
	fields.
Vibration
	Degradation of some product specifications can occur if this instrument is operated
CAUTION
	while subjected to continuous vibrations of less than or equal to 0.21 grms in the
	5 Hz to 500 Hz frequency range.
Ground the Instrument or System
	To minimize shock hazard, the instrument chassis and cover must be connected
WARNING
	to an electrical protective earth ground. The instrument and/or system must be
	connected to the AC power mains through a grounded power cable, with the
	ground wire firmly connected to an electrical ground (safety ground) at the
	power outlet. Any interruption of the protective (grounding) conductor or
	disconnection of the protective earth terminal will cause a potential shock
	hazard that could result in personal injury.
	This is a Safety Class 1 Product (provided with a protective earthing ground
WARNING
	incorporated in the power cord). The mains plug shall be inserted only in a socket
	outlet provided with a protective earth contact. Any interruption of the protective
	conductor inside or outside of the product is likely to make the product
	dangerous. Intentional interruption is prohibited (IEC 348 clauses 17.3.3 c and
	17.3.4).
	Always use the three-prong AC power cord supplied with this product. Failure to
CAUTION
	ensure adequate earth grounding by not using this cord may cause product damage.

Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz 107