Agilent Technologies N8201A Trigger Source set to ALARM0, Trigger Detection, Execute Trigger

Using the Agilent Synthetic Instrument GUI 3

Trigger Source (set to ALARM0)

Table 2 Controls available when Trigger Source is set to ALARM0

Alarm Mode	Defines the way that Alarm Time will be interpreted. In absolute mode,
	the alarm will begin firing at the time of day specified in Absolute Alarm
	Time. In relative mode, the alarm will begin firing at a time relative to
	when the alarm is set up.
Relative Alarm Time	Defines the number of seconds after pressing Execute Trigger that the
	first alarm will occur.
Absolute Alarm Time	Defines the time that the first alarm will occur.
Alarm Period	Defines the time between successive alarms.
Alarm Repeat	Defines the number of times the alarm will be repeated.
	A value of 1 means that the alarm will occur once and will not be
	repeated. A value of 2 means that the alarm will occur twice.
	A value of 0 means that the alarm will be repeated until the alarm is
	disabled.

Trigger Detection

Controls the trigger polarity. It is Positive to trigger on a rising edge and Negative to trigger on a falling edge.

Execute Trigger

Sends the new trigger settings to the instrument

Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz 75