Using the Agilent Synthetic Instrument GUI

3

Settling Mode

Selects the operating mode for the Settling Channel: Disabled, Driven, or Wired OR.

Wired OR is only available for LXI channels.Use Wired OR if more than one instrument is driving the LXI channel. When only one instrument is driving the LXI channel then use the Driven mode.

Settling Destination Path

The target of the LAN event. The Settling Destination Path can be either an IP address, a hostname, or 'All'. (The function is only visible if Settling Channel is a LAN channel and can be set if the Settling mode is not Disabled.)

Settling Slope

Determines whether an event will occur on positive or negative edges. Possible values are: Positive or Negative.

NOTE

Settling mode must be enabled for Settling Slope to be set.

 

Execute Settling Event

Starts a settling event after all of the parameters are define.

Event Logging

When enabled, a history of all instrument errors and messages are displayed.

Enable Logging

Enables or disables event logging.

Event Log

Displays the event log in the right pane when the Event Log page is selected.

Clear Event Log

Clears the event log.

Disable All Events

Prevents any previously events from occurring.

Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz

79

Page 83
Image 83
Agilent Technologies N8201A manual Event Logging