Agilent Technologies N8201A manual Hardware Setup and Configuration

2Hardware Setup and Configuration

1Connect a LAN cable from the LAN connector on your PC to an empty connector on your internal local area network or LAN hub.

2Connect a LAN cable from the LAN connector on the rear panel of the

N8201A performance downconverter to an empty connector on your internal local area network or LAN hub.

3Turn on power to the PC.

4Turn on power to the N8201A performance downconverter and wait until the LAN LED turns solid green or until you hear an attenuator click from within the

N8201A performance downconverter; this can take up to four minutes depending on whether the instrument is using DHCP or Auto IP.

30 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz