Agilent Technologies N8201A manual Downconverter to Spectrum Analyzer Connections

Hardware Setup and Configuration 2

(Optional) Step 7. Verify Operation > 3 GHz

	Operation verification is a test that, when completed, will ensure that the
	N8201A performance downconverter is operating correctly in the high band (> 3 GHz).
CAUTION	Make sure that the total power of all signals at the N8201A performance
	downconverter input does not exceed +30 dBm (1 watt).

Performing a Self-Test

Downconverter to Spectrum Analyzer Connections

•Downconverter: 7.5 MHz Out

•Spectrum Analyzer: RF Input

Downconverter to Source Connections

•Downconverter: RF Input

•Source: RF Output

Perform the following procedure to run a self-test:

1From the Windows Desktop,

select Start > All Programs > Agilent SI Tools > Agilent Synthetic Instrument GUI.

Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz 47