Agilent Technologies N8201A Installing Software and Instrument Drivers, Click Instrument Drivers

1Software Installation

Installing Software and Instrument Drivers

1	Verify the PC Meets Minimum Requirements
	•	1 GHz Intel Pentium processor
	• Microsoft Windows XP Professional or Home Edition (Service Pack 1
		or 2), Windows 2000 (Service Pack 2)
	•	512 MB of RAM
	•	Up to 40 MB of available hard- disk space
	• Microsoft Internet Explorer 6.0 (or higher), or Netscape 7.1 or 8.0
2	Place the CD with the Instrument Drivers and Documentation in the CD-ROM drive.
	a	Adobe Acrobat Reader 5.0 or later is used during this installation process and can be
N O T E
		installed from the CD described above.
	b	Click Adobe Acrobat Reader 5.0 to install the software, if needed.
3	Click Instrument Drivers.

C A U TI O N	If the following software or instrument drivers are installed on the PC to be used, uninstall
	them and install the software and instrument drivers shipped on the CD described above:
	Step 1. Microsoft .NET 1.1
	Step 2. Agilent I/O Libraries
	Step 3. IVI Shared Components
	Step 4. Agilent Synthetic Instrument Finder
	Step 5. Agilent Synthetic Instrument GUI
	Step 6. IVI-COM Drivers (for N8201A with Option H02 and without Option H02)
	Step 7. Agilent N8201A Performance Downconverter User Interface
	(Optional) Install the following only if the downconverter has Option H02
	Step 8. Agilent N8201A Option H02 Spectrum Analyzer GUI
	(Optional) Steps 9, 10, and 11 are available to support legacy installations and are not
	required if the software from Step 8 is being used. This interface can be installed along with
	the Agilent N8201A Option H02 Spectrum Analyzer GUI, but only one interface can be used
	at any given time.
	Step 9. Microsoft Virtual Machine (VM)
	Step 10. Apache HTTP Server
	Step 11. SA Remote Web Server

6 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz