Agilent Technologies N8201A manual 109

Service, Support, and Safety Information 6

Table 6 Safety symbols and instrument markings

Safety symbols	Definition
	Warning: risk of electric shock.
	Warning: hot surface.
	Caution: refer to instrument documentation.
	The CE mark is a registered trademark of the European
	Community.
	The CSA mark is a registered trademark of the
	CSA-International. This instrument is in compliance with
	CSA 1010 Edition 2.
N10149	The C-tick mark is a registered trademark of the Spectrum
	Management Agency of Australia. This signifies compliance
	with the Australian EMC Framework regulations under the
	terms of the Radio Communications Act of 1992.
	This symbol indicates separate collection for electrical and
	electronic equipment, mandated under EU law as of August 13,
	2005. All electric and electronic equipment are required to be
	separated from normal waste for disposal
	(Reference WEEE Directive, 200/96/EC). Do not throw
	batteries away, but collect as small chemical waste.
ISM 1-A	This text indicates that the instrument is an Industrial Scientific
	and Medical Group 1 Class A product (CISPER 11, Clause 4).
ICES/NMB-001	This text indicates product compliance with the Canadian
	Interference-Causing Equipment Standard (ICES-001).
	Laser radiation symbol: marked on products that have a laser
	output.
	Alternating current.
	Both direct and alternating current.
	Three-phase alternating current.
	Earth (ground) terminal.
	Protective earth (ground) terminal.

Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz 109