Service Diagnosis

 

ICEU060

 

SYMPTOM

POSSIBLE CAUSE

SUGGESTED CORRECTION

 

 

Unit will not run.

Blown fuse or breaker.

Replace fuse and check for cause of

 

 

 

blown fuse or breaker.

 

Compressor cyles

Low voltage.

Check voltage at the supply to the

 

intermittenly.

 

building.

 

 

 

Check circuit for overloading.

 

 

Dirty condenser.

Clean the condenser.

 

 

Restricted air circulation.

Allow sufficient air circulation.

 

 

Non condensibles in system.

Evacuate and recharge with name plate

 

 

 

Amount.

 

Cubes too small.

Cube size control too warm.

Check and adust for operation.

 

 

Partially restricted cap tube.

Recover charge, install new drier,

 

 

 

evacuate, weigh in new charge.

 

 

Moisture in system.

Same as above.

 

 

Overcharged.

Same as above.

 

 

Undercharged.

Same as above. Check for leak.

 

Cloudy cubes.

Spray nozzle clogged.

Clean.

 

 

Needs cleaning.

Clean with approved ice machine

 

 

 

cleaner.

 

Irregular size cubes,

Some jets plugged.

Clean jets.

 

Some cloudy.

Shortage of water.

Check water supply.

 

Cubes too large.

Cube size control adjusted

Check and adjust for proper operation.

 

 

improperly.

 

 

 

Decreased ice capacity.

Inefficient compressor.

Replace compressor.

 

Low ice capacity.

Leaky inlet water valve.

Replace water valve.

 

 

Non condensibles in system.

Replace the refrigerant.

 

 

High head pressure.

Dirty condenser.

 

 

 

Worn fan motor.

 

 

 

High air or water temperatures.

 

 

High air or water temperatures.

Relocate machine or water line.

 

 

Overcharged.

Replace the refrigerant.

 

 

Restricted system.

Replace the drier and refrigerant.

 

Poor harvest.

Short defrost cycle.

Replace the cube size control.

 

 

Not enough water.

Check water supply.

 

 

Hot gas valve does not work.

Replace hot gas valve.

 

 

Inlet water valve plugged.

Replace inlet water valve.

 

 

Air and water temperature too low.

Relocate machine or water line.

 

No harvest.

Cube size control does not work.

Replace cube size control.

 

 

Hot gas valve does not work.

Replace hot gas valve.

 

 

Inlet water valve does not work.

Replace inlet water valve.

 

Excessive water in ice

Bin drain plugged.

Clean bin drain.

 

storage bin.

 

 

 

Page 14

Page 14 Page 16
Page 15
Image 15
Ice-O-Matic ICEU060 installation manual Service Diagnosis
Page 14 Page 16

ICEU060 specifications

The Ice-O-Matic ICEU060 is a high-efficiency ice maker that has become a popular choice among commercial establishments seeking reliable and high-quality ice production. This model is specifically designed to cater to the needs of restaurants, bars, cafes, and other foodservice operations, providing a consistent supply of ice that is essential for service.

One of the primary features of the ICEU060 is its production capacity. This unit is capable of producing up to 600 pounds of ice per day, ensuring that even during peak hours, businesses can meet their ice requirements. The ICEU060 is designed for efficiency, with a large storage capacity that holds up to 250 pounds of ice at a time. This minimizes the need for frequent ice refills, allowing staff to focus on other important tasks.

The ICEU060 employs advanced technologies for optimal performance. It features an air-cooled condenser, which enhances energy efficiency by using ambient air to cool the unit. This design not only saves energy but also helps prolong the lifespan of the machine. Additionally, the unit incorporates a Harvest Assist feature that ensures quick and efficient ice harvesting, reducing the time it takes for new ice to be produced.

Another notable characteristic of the ICEU060 is its durability. Built with a stainless steel exterior, this ice maker is not only resistant to corrosion but also easy to clean and maintain. The robust design ensures that it can withstand the rigors of a busy kitchen environment, while maintaining its aesthetic appeal.

The Ice-O-Matic ICEU060 is also designed for ease of use. It comes with an intuitive control panel that allows operators to monitor production cycles and make adjustments as needed. Furthermore, the unit is equipped with a self-cleaning feature, streamlining maintenance and ensuring that the ice produced is of the highest sanitary quality.

In summary, the Ice-O-Matic ICEU060 ice maker stands out due to its impressive production capacity, energy-efficient technologies, and durable construction. By incorporating features that prioritize performance and ease of use, the ICEU060 proves to be an essential asset for any business that relies on a consistent supply of high-quality ice. This makes it a valuable investment for establishments focused on providing exceptional service to their customers.
Top Page Image Contents