5 MEMORY PROGRAMMING
■Memory names
ïProgramming memory names
qSelect the memory channel to be programmed:
➥Push [V/M] to select memory mode.
➥Push [Y] or [Z] to select the memory channel.
wPush [M/W] for 5 sec. to enter memory name writing mode.
• The first character of the name flashes.
ePush [SCAN] or [SQL] as many times as necessary to enter the desired name.
•To erase a character, overwritet with a space (displayed as _).
•To move the cursor forwards or backwards, use [Y] or [Z].
•Push [
] for 2 sec. to erase all characters.
rPush [M/W] to input the set name.
•Flashing stops.
•Memory channels can be programmed with names of up to 5 characters in length.
•When no name is programmed, the display shows the operating frequency.
•The following characters can be used in names:
➥0 to 9, A to Z (capitals), (space),
[EXAMPLE]: Setting the name to “TOWER”.
MW for 5 sec. SCAN or SQL + | or | MW for 2 sec. |
MR
MR
MR
MR
10
