MEMORY PROGRAMMING 5 
■Programming a memory channel
The transceiver has 19 memory channels for storage of often
qPush [V/M] to select VFO
mode, if necessary.
wPush [Y] or [Z] key to select the desired frequency.
• Push [V/M] key one or more times to use the dial select function, if desired.
DSetting lockout channels
In order to speed up the scan interval, you can set memory channels you don’t wish to scan as lockout channels.
qPush [V/M] to select memory mode, if necessary.
•“ MR ” appears.
wPush [Y] or [Z] to select a memory channel to set as a lockout channel.
ePush [SCAN] for 2 sec. to toggle the lockout setting ON/OFF.
ePush [MW] for 5 sec. to enter memory programming mode.
MR
• “ MR ” and memory channel number appear.
rPush [Y] or [Z] to select the
desired memory channel | MR |
number. |
|
tPush [MW] for 2 sec. to pro-
gram the information into the channel and return to VFO mode.
•“SKIP” appears when the chan- nel is set as a lockout channel.
•If memory channel scan is acci- dentally started, push [SCAN] to stop it.
MR
SKIP
Memory channel 15 is set as a lockout channel.
9
