SPECIFICATIONS 10 
DGeneral |
|
|
| DTransmitter |
|
|
|
• Frequency coverage | : TX | 118 to 136.975 MHz | • Output power | : 3.7 W (PEP) | typical | ||
| RX | 108 to 136.975 MHz |
| 1.0 W (CW) | typical | ||
• Mode | : AM (6K00A3E) |
| • Modulation | : Low level modulation | |||
• Number of memory channels | : 19 |
|
| • Modulation limiting | : 80 to 100 % |
| |
• Acceptable power supply | : 9.6 V DC nominal | • Audio harmonic distortion | : Less than 10 % | ||||
(negative ground) | (authorized battery packs) | (at 60 % modulation) |
|
|
| ||
• Usable temp. range | : | • Hum and noise ratio | : More than 35 dB | ||||
• Frequency stability | : ±10 ppm (0˚C to +50˚C) | • Spurious emissions | : More than 60 dB | ||||
• Current drain | : |
|
| DReceiver |
|
|
|
Tx | 1.2 A (CW) max. |
|
|
| |||
| 0.7 A (CW) typical | • Receive system | : Double conversion | ||||
Rx | 55 mA typical | (at stand by) |
| superheterodyne | |||
| 250 mA max. | (at AF max.) | • Intermediate frequencies | : 1st | 28.95 MHz | ||
• Antenna impedance | : 50 Ω (nominal) |
|
| 2nd | 450 kHz |
| |
• Dimensions | : 58(W)✕140.5(H)✕32.3(D) mm | •Sensitivity (with 50 Ω load) | : 1 µV (at AM 6dB S/N) | ||||
(projections not incl.) |
|
|
| • Squelch sensitivity | : 1 µV |
|
|
• Weight (with | : 425 g |
|
| (with 50 Ω load) |
|
|
|
|
|
|
| • Selectivity | : 8 kHz (at 6 dB) |
| |
|
|
|
|
| 25 kHz (at 60 dB) | ||
|
|
|
| • Spurious response | : More than 60 dB | ||
|
|
|
| • Audio output power | : 500 mW (at 10% distortion | ||
|
|
|
| (at 9.6 V DC) | with an 8 Ω load) | ||
|
|
|
| • Noise and hum | : More than 25 dB | ||
|
|
|
| • External SP connector | : | ||
All stated specifications are subject to change without notice or obligation.
17
