Icom IC-F110, IC-F210 2

2OPERATION

If the transceiver has a [TX CH] key, the display can be tog-

gled between the operating channel number (or name) and

TX code channel number (or name). When the TX code

channel number (or name) is displayed, the []/[]keys

select the TX code channel.

To select a TX channel:

qPush [TX CH]—a TX code channel appears.

wPush []/[]to select the desired TX code channel.

ePush [CALL] to transmit the selected TX code.

rPush [TX CH] again to return to the channel display.

If the transceiver has a [TX CH]key, TX code contents can be

changed within the allowable digits.

To select a TX code:

qPush [TX CH]—a TX code number appears and the ﬁrst

digit blinks.

wPush []/[]to select the desired number of the blink-

ing digit.

ePush [TX CH] to enter the selected number and the next

digit will start blinking automatically.

rRepeat step wand eto input all allowed digits.

tPush [CALL] to transmit the selected TX code.

If the transceiver has a [DTMF] key, the automatic DTMF

transmission function is available. Up to 7 DTMF channels

may be available.

To transmit a DTMF code:

qPush [DTMF]—a DTMF code channel appears.

wPush []/[]to select the desired DTMF channel.

ePush and hold [DTMF] to transmit the DTMF code on the

selected DTMF channel.

The UT-109 (#02) or UT-110 (#02) optional voice scrambler

unit provides high performance private communication

between stations with the same scrambler codes.

To turn the scrambler function ON and OFF:

qPush and hold [SCRM]to turn the scrambler function ON.

wPush [SCRM] to turn the function OFF.

IC-F110_F210_GEN.qxd 02.12.11 4:25 PM Page 9 (1,1)