Icom IC-F210 SmarTrunk II and conventional modes, SmarTrunk II operation, Receiving a call

3 OPTIONAL SmarTrunk II™ OPERATION

■SmarTrunk II™ and conventional modes

This transceiver is capable of SmarTrunk II™ functions.

The optional UT-105 allows communication in conventional channels or SmarTrunk II™ channels. Select a channel bank for SmarTrunk II™ before trunking operation.

•Push [BANK] several times to select a channel bank for con- ventional channels or SmarTrunk II™ channels.

- Scanning starts when a channel bank for SmarTrunk II™ opera- tion is selected.

- Contact your dealer for channel bank details.

NOTE: Optional HM-100TN DTMF MICROPHONE is required. Contact your dealer for details.

■SmarTrunk II™ operation

These features are enabled by a dealer and may not be avail- able in your system. Contact your dealer for details.

DPlacing a telephone call

Enter the phone number followed by [1], [M].

•A high-pitched beep indicates that the number is accepted.

•When the called party answers, push the [PTT] switch to talk, and release it to listen.

DCalling another local system subscriber

Enter the subscriber number followed by [3], [M].

•A high-pitched beep indicates that the number is accepted.

•You hear ringing, then two short beeps when the subscriber answers.

•If the other subscriber is on another call or out of range, you hear a fast busy signal and the call terminates automatically.

DReceiving a call

When you hear ringing, push [M] to answer.

•For a group call, you hear a short ring followed by two short beeps. You do not have to answer a group call to hear it over the air.

11