Icom IC-F3022T/S TX code channel selection, DTX code number edit, Using TX Code CH Select KEY

BASIC OPERATION 3

DTX code channel selection

If the transceiver has [TX Code CH Select] assigned to it, the indication can be switched between the operating channel number (or name) and TX code channel number (or name). When the TX code channel number (or name) is displayed, [CH Up] or [CH Down] selects the TX code channel.

USING [TX CODE CH SELECT] KEY:

qPush [TX Code CH Select]— a TX code channel number (or name) appears.

wPush [CH Up] or [CH Down] to select the desired TX code channel.

•Push [TX Code CH Select] again to return to the operating chan- nel number indication.

ePush [Call] to transmit the selected TX code.

USING [TX CODE CH UP]/[TX CODE CH DOWN] KEY:

If the transceiver has [TX Code CH Up] or [TX Code CH Down] assignment, the programmed TX code channel can be selected directly when pushed.

DTX code number edit

If the transceiver has [TX Code CH Select] or [TX Code 3

Enter] assigned to it, TX code contents can be edited within the allowable digits.

USING [TX CODE CH SELECT] KEY:

qPush [TX Code CH Select] to enter the TX code channel selection mode.

•Select the desired channel before entering the TX code channel selection mode if necessary.

wPush and hold [TX Code CH Select] for 1 sec. to enter the TX code edit mode.

ePush [TX Code CH Select] several times to select the desired digit to be edited.

• The digit to be edited blinks.

rPush [CH Up], [CH Down] or 10-keypad* to set the desired digit.

tPush [TX Code CH Select] to set the digit. The digit to the right will blink automatically.

•When the 10-keypad* is used for setting, the digit to be edited moves to the right automatically without pushing [TX Code CH Select].

yRepeat r and t to input all allowable digits.

uAfter setting the last digit, push [TX Code CH Select] to set the code and return to the stand-by mode.

*10-key versions only

13