Icom IC-F3022T/S instruction manual Emergency transmission, Scrambler function, Stun function

■Emergency transmission

When [Emergency Single] or [Emergency Repeat] is pushed, an emergency signal is automatically transmitted for the spec- ified time period.

When [Emergency] is pushed, the DTMF emergency signal is transmitted on the priority channel.

When [Emergency Single] or [Emergency Repeat] is pushed for the specified time period, the DTMF emergency signal is transmitted once or repeatedly on the emergency channel. However, when no emergency channel is specified, the signal is transmitted on the previously selected channel.

■Scrambler function

The voice scrambler function provides private communication between stations. The frequency inversion type is equipped to all versions, moreover, the optional Rolling or Non-rolling type can be available.

qPush [Scrambler] to turn the scrambler function ON.

• “ ” appears.

wPush [Scrambler] again to turn the scrambler function OFF.

• “ ” disappears.

BASIC OPERATION 3

■ Stun function

When the specified ID, set as a killer ID, is received, the stun
function is activated.	3

When the killer ID is received, the transceiver switches to the password required condition. Entering of the password via the keypad is necessary to operate the transceiver again in this case. (p. 10)

■Priority A channel selection

When one of the following operations is performed, the trans- ceiver selects the Priority A channel automatically.

Priority A is selected when;

•Clear down signal is received/transmitted

- Set the ‘Move to PrioA CH’ item as ‘Clear down.’

•Turning the power ON

The Priority A channel is selected each time the trans- ceiver power is turned ON.

•Status call

The Priority A channel is selected when transmitting a sta- tus call.

15