Icom IC-M88 instruction manual Battery voltage indicator bt, Function Indication Switch

DBattery voltage indicator “bt”

This function contains display or non-display settings of the voltage of the connected battery pack when the power is ON.

•The voltage of the connected battery pack is displayed for 2 sec. after power is turned ON.

	PUSH
Battery voltage OFF	Battery voltage ON
(default)

DScrambler code “cd” (Available for I/S version only) There are 32 codes (1 to 32) available for programming. In order to understand each other, all transceivers in your group must have the same scramble code.

PUSH

Scrambler code 1 (default) Scrambler code 32

		SET MODE 8
SET MODE LIST
Function	Indication	Switch
Beep tone function	"bP"	OFF / ON* / US
Weather alert function	"AL"	OFF* / ON
Priority scan function	"Pr"	OFF* / ON
Scan resume timer	"St"	OFF* / ON
Auto scan function	"AS"	OFF* / ON
Dual/Tri-watch function	"dt"	Dual* / Tri
Monitor switch action	"Sq"	Push* / Hold
Automatic backlighting	"bL"	OFF / 1 / 2 / 3*
LCD contrast selection	"LC"	1 / 2 / 3* / 4
Auto power save function	"PS"	OFF / ON*
Self check function	"SC"	OFF* / ON
Battery voltage indicator	"bt"	OFF* / ON
Scrambler code**	"cd"	1* / 2 / / 32

* default setting

** Available for I/S version only

21