![](/images/new-backgrounds/1293652/29365239x1.webp)
5 SCAN OPERATION
■Setting tag channels
For more efficient scanning, add desired channels as tag channels or clear tag channels for unwanted channels. Non- tag channels will be skipped during scanning. Tag channels can be assigned to each channel group (USA, INT, CAN) inde- pendently.
qSelect the desired channel group (USA, INT, CAN) by push-
ing [CH/WX•U/I/C/L] for 1 sec., if desired.
wSelect the desired channel to set as a tag channel.
ePush both [Y] and [Z] for 1 sec. to set the displayed chan- nel as a tag channel.
•“TAG” appears in the function display.
rTo cancel the tag channel setting, push both [Y] and [Z] for 1 sec.
• “TAG” disappears.
•Clearing all tag channels in the selected channel group While pushing and holding both [Y] and [Z], turn power ON to clear all tag channels in the channel group.
■Starting a scan
Set the weather alert function, priority scan function, scan re- sume timer and auto scan function in advance, using SET mode. (pgs. 18, 19)
qSelect the desired channel group (USA, CAN, INT) by
pushing [CH/WX•U/I/C/L] for 1 sec., if desired.
•When the weather alert function is in use, select the desired weather channel with [CH/WX•U/I/C/L] and [Y]/[Z].
wPush [SCN•DUAL] to start priority or normal scan.
•“SCAN” blinks in the function display.
•“16” appears during priority scan.
•When a signal is received, scan pauses until the signal disap- pears or resumes after pausing 5 sec. according to SET mode setting. (Channel 16 is still monitored during priority scan.)
•Push [Y]/[Z] to check the scanning tag channels, to change the scanning direction or resume the scan manually.
eTo stop the scan, push [SCN•DUAL].
•“SCAN” disappears.
•Pushing [PTT], [16•9] or [CH/WX•U/I/C/L] also stops the scan.
[Example]: Starting a normal scan.
|
| Scan pauses when receiving |
Push | Scan starts. | a signal and audio is emitted. Push |
DUAL |
| DUAL |
to stop the scan.
14