8
3BASIC OPERATION
■Call channel programming
Call channel is used to select Channel 9 (default), however,
you can program the call channel with your most often-used
channels in each channel group for quick recall.
qPush both [Y]and [Z]on
the transceiver one or more
times to select the desired
channel group (U.S.A., In-
ternational or Canada) to be
programmed.
wPush [16•9]for 1 sec. to se-
lect the call channel of the
selected channel group.
•“CALL” and call channel num-
ber appear.
ePush [16•9]again for 3 sec.
(until a long beep changes
to 2 short beeps) to enter
the call channel program-
ming condition.
•Channel number starts blink-
ing.
rPush [Y]or [Z]to select
the desired channel.
tPush [16•9]to program the
displayed channel as the
call channel.
•Push [CH/WX•DUAL]to can-
cel.
•The channel number stops
blinking.